Home
CCPM
  • Tools Required
  • Items Required
  • Preparing The Servo Box
  • Cutting The Frame
  • Rear Servo
  • Front Frame Support
  • Push Rods
  • Mounting The Servo Box
  • Anti Rotation Guide
  • Align Swash Plate
  • Centre Servos
  • Installing Rear Servo   • Radio Setups

Trex eCCPM Mod : Align Swash Plate

If you are using the Align swash plate, remove the ant-rotation pin, replace the bolt with a 14mm one (approx - you will find it in the kit screwbag). Use a 2mm nut to lock the bolt to the swash plate allowing the spacer to act as a roller.

Back Next